To watch the review, click here, or click on the image below to watch it via Facebook

Click on the above image to watch the review on Facebook, or click here to watch the replay on YouTube

Come on! Who doesn’t want a stronger data signal?

Your phone’s RSRP reading can indicate a stronger signal with the R79X ReachCase

Remember to interpret correctly, for example:

“-70 dBm” is stronger and therefore better than “-76 dBm”. The lower the better

If you don’t see an immediate jump in “bars” after you do the attach, you can try the steps below to toggle between RSRP and bars indicators. If you have questions, tweet the company @ReachCase

Step 1: Put your phone into field test mode and convert your bars to RSRP in dBm. To do this, follow the steps below:
Dial *3001#12345#* to enter field test mode
To return to home screen and maintain numerical RSRP:
Hold down the power button until you see the “slide the power off” bar.
Release the power button and do not power off your device
Press and hold the home button until you return to your home screen

Step 2: Your RSRP reading updates infrequently. Now refresh your signal:
Turn Airplane Mode ON
Wait 5 seconds
Turn Airplane Mode OFF
Wait 5 seconds for RSRP reading to stabilize
Note RSRP value when you hold bare phone in your hand
Tap the numerical value to show number of bars
Tap the bars to return to numerical RSRP
Stay put – your signal can vary significantly if you change location or direction

Step 3: Put R79X case on with the antenna extended and hold in same hand
Turn Airplane Mode ON
Wait 5 seconds
Turn Airplane Mode OFF
Wait 5 seconds for RSRP reading to stabilize
Note RSRP value when you hold the phone in your hand with the Reach Case antenna extended
Tap the numerical value to show number of bars
Tap the bars to return to numerical RSRP

The 3 steps above were provided by the brand’s agency.

Disclaimer: No monetary compensation was provided by the brand or its agency.
See disclosures page. Thanks.